Steps and Tips on How to Use a Trickle Charger for any User
You are probably thinking of getting a trickle charger after experiencing a dead battery in the middle of nowhere. It was included in your plans before, but you have doubts about whether it will make any difference.
People also ask - are trickle chargers safe. It can be a smart investment, particularly if you are thinking of having an alternative power source for your car’s battery. In this article, we will talk about how to use a trickle charger article and if you need one.
Trickle chargers keep nickel-cadmium and lead-acid batteries fully charged to recharge the drained battery during storage. One way to help extend the lifespan of a battery is to keep it charged.
The trickle chargers are the best battery charger for lawnmower batteries. It will keep them fully charged while stored for the winter.
If connected to your battery, the trickle charger will automatically shut off once it reached the correct voltage. Will a trickle charger charge a dead battery? The charger will turn on once it detects that the battery is discharged.
Changing the settings of some of the trickle chargers are not possible as they are preset at the factory. But, some require adjustment before using.
What is Trickle Charger?
The trickle charger is designed to be left on a car to recharge the car’s battery. Your battery will remain fully charged as it slowly adds the charge and will not allow the depletion of charge that the battery usually has.
There are lots of opinions about the amount of time you can leave a trickle charger on. And because of this, various types of charger have been developed.
A trickle charger can be left connected to the battery as long as you want. You can use the charger on a vehicle that is seldom used or if stored away during summer or winter.
It is left in case the car needed emergency power or other unexpected situations. By using the trickle charger, the battery will be prevented from depleting when not in use.
How to Connect a Trickle Charger to a Car Battery?
The charger is used to regulate the charging rate and avoid overcharging. The question is, how long does it take to charge a car battery with a trickle charger?
It is best to charge your car’s battery at the same rate as it self-discharge to maintain its full battery capacity. Overcharging or charging it too fast can damage the battery.
You don’t need to be an expert in using a trickle charger when charging a battery. Most of these chargers have a simple box where you can find the guts of the charger, two alligator clips, and a power cable.
Before connecting them, make sure that amperage and voltage are correctly set. Check the buttons and switches on the charger box and then set them before attaching the charger to a power source.
steps how to use a trickle charger
Prepare the Battery for Charging
Before connecting the charger, make sure you have taken all the safety measures. First, it is vital that your car is parked in an area free from rain, and it should be well-ventilated.
It’s because the process will discharge excess hydrogen gas, and if you do the process in an enclosed area, a fire or explosion might occur. The ignition of your car must be turned off, the charger is unplugged, and the key is removed.
Determine the Best Ground Location
Look for the perfect location to connect the charger’s negative terminal. It is the secret to a safer and efficient charging circuit. Usually, it is the bare metal on the frame or a big bolt connected to the engine or chassis that is used.
But, if you cannot find one, a part of the frame with less dirt, oil, and grime is enough. Never use the negative terminal in your battery. It can cause fire or explosion.
Connect the Cable
Attach the alligator clips. You should have a red clip and a black clip. Connect the red cable or the positive cable into the battery’s positive terminal you need to charge. After connecting it properly, connect the negative or the black wire to the ground location described in the earlier step.
You need to ensure that the negative wire is connected correctly before plugging your charger. Never touch the wires while the charger is plugged in and turned on, as it can result in shock or injury.
If you are sure that everything is in the right place, you can connect the trickle charger to the power socket.
Turn on the Charger
Once you have connected everything correctly and set it as described in the manual, you can plug the charger now and set it to on. Usually, a battery charger has an amp meter that will read higher on a dead battery. If you have a fully charged battery, it will read lower to 0.
If the meter provides a low reading, your battery may not require charging. It can also be possible that your ground connection is not enough. If this problem occurs, you need to turn off the charger, remove it from the socket, and make the connection again.
You need to make sure that it is charging correctly by checking the charger’s display. If in case it is not charging, your battery might be dead, and there is no way to recover it. If not, you can continue charging the battery until it is fully charged.
Some trickle chargers can be left connected continuously for several months without damaging the battery. Start the car with a trickle charger connected.
This can provide a long term battery maintenance technique. Some trickle charge car battery while connected for a few days only. Make sure that you read your trickle charger's manual carefully to learn more.
A trickle charger can maintain the battery’s charge, so make sure to connect only to a fully charged battery. You can use a regular battery charger in recharging your battery. Make sure that the battery is fully charged before connecting the trickle charger.
Also, keep in mind that before you connect the trickle charger to the battery terminals, make sure that it is unplugged. The damage on your battery and charger can be prevented by the reverse-polarity feature built into the charger.
If you have questions about the topic, feel free to comment below.
Check Out Other Types of Car Batteries